SNMP Procedures Polycom DMA System SNMP Support
Polycom, Inc. 417
To enable and configure SNMP monitoring
1Go to Admin > Local Cluster > SNMP Settings.
2Select Enable SNMP monitoring and select an SNMP version. For
information on the SNMP versions, see “SNMP Overview” on page407.
3Configure the SNMP version, transport protocol, and other settings. If
using SNMPv3, configure the security user, authentication, and privacy
settings. For descriptions, see “SNMP Settings” on page409.
4To enable notifications (Traps or Informs) to specified users/hosts, do the
following:
aIf using SNMPv3, add one or more notification users (see below).
bAdd one or more notification agents (see below).
5Click Update.
To add an SNMP notification user to a DMA system
1Go to Admin > Local Cluster > SNMP Settings.
2In the Notification Users section, click Add User.
3Configure the settings in the Add Notification User dialog box. For
descriptions, see “Add Notification User Dialog Box” on page412.
4Click OK.
The user appears in the Notification Users list.
To add an SNMP notification agent to a DMA system
1Go to Admin > Local Cluster > SNMP Settings.
2In the Notification Agents section, click Add Agent.
3In the Add Notification Agent dialog box, select Enable agent and
configure the settings for this agent. For descriptions, see “Add
Notification Agent Dialog Box” on page 415.
4Click OK.
The agent appears in the Notification Agents list.
To download the MIB package for a DMA system
1Go to Admin > SNMP Settings.
2Click Download MIBs.