Chapter 8 -
Table 8-5: MCU's Cards Status
Field | Description |
|
|
Slot | Displays the slot icon and number; a white icon |
| indicates an empty slot and a green icon indicates |
| an occupied slot. |
|
|
Type | Displays the type of card that occupies the slot. The |
| following card types are available, as listed in |
| Table |
|
|
Clock | This field is valid only for |
| which Network card/span is used as the Master |
| Clock. |
|
|
Configured Clock | Indicates which ISDN Network card was configured |
| as the Primary network interface (for clocking). |
| Changes take effect and are updated during the next |
| MCU reset or power up. |
|
|
Status | Indicates the card status: Normal or Faulty. |
|
|
Occupied Units | Indicates the units that are currently used to run |
| conferences by displaying their sequential number |
| on the card. For example, 1, 6 indicates that two |
| units, unit # 1 and unit # 6 are used to run |
| conferences. |
|
|
Faulty Units | Indicates whether there are units on the card that |
| are faulty and the displays the sequential number of |
| the faulty unit. |
|
|
Disabled Units | Indicates the units that were disabled by the |
| operator. The units may be disabled using the card's |
| |
|
|
Num Units | Indicates the total number of units available for each |
| module. |
|
|
For additional information, see the MGC Manager Administrator’s Guide, Chapter 4.
The configuration of each card can be checked and for specific cards, modified if required. Any operator can view the card’s configuration settings. Only an operator defined as Superuser can modify the configuration settings of a card.
