MGC-25 Getting Started Guide

Connecting to an MCU

Initial IP

Configuration

Installing the

MGC Manager

Starting the MGC

Manager

Once the MCU connection parameters are defined, the MGC Manager can be connected to all defined MCUs simultaneously. The MGC Manager allows you to set up conferences, make reservations, monitor On Going Conferences and perform other activities on several MCUs. The MGC Manager reports the status of each MCU connection.

To connect the operator workstation to an MCU:

1.In the Browser pane, expand the MCUs Network tree. A list of MCUs appears below the MCUs Network icon.

2.Double-click the MCU icon.

Alternatively, right-click the MCU icon, and then click Connect.

Defining an MCU

Connecting to an MCU

Configuring the

Network Services

The Logon dialog box opens.

3.Enter your Login Name and Password, and then click OK.

Each MCU is initially configured with a default operator whose Login and Password are both POLYCOM. Additional operators can be defined. For more details, see the MGC Administrator’s Guide, Chapter 6.

3-8

Page 32
Image 32
Polycom DOC2232A manual Connecting to an MCU, To connect the operator workstation to an MCU