MGC-25 Getting Started Guide

The new Entry Queue is added to the Meeting Rooms, Entry Queues &

SIP Factories list.

Setting an Entry Queue as Default

A default Entry Queue can be defined for the MCU, regardless of the dialed IP card. The new default Entry Queue can be either a video Entry Queue or an Audio Only Entry Queue. Participants are automatically routed to the default Entry Queue when dialing one of the following strings:

Network Service Prefix##Numeric ID, when the numeric ID is incorrect

Network Service Prefix##Numeric ID##Password, when the numeric ID is incorrect

Network Service Prefix only

IP address of IP card##Numeric ID, when the numeric ID is incorrect

IP address of IP card##Numeric ID##Password, when the numeric ID is incorrect

IP address of the IP card only

To set an Entry Queue as default:

In the Meeting Rooms and Entry Queues list, right-click the Entry Queue and select Set as Default.

The default Entry Queue is identified by a bold name.

7-4

Page 86
Image 86
Polycom DOC2232A manual Setting an Entry Queue as Default, SIP Factories list, To set an Entry Queue as default