MGC-25 Getting Started Guide
2.Start by modifying the IP Address.
Using the Left/Right buttons, move to the desired number to modify.
Left/Right Buttons
3.Using the up/down buttons, modify the number. The number value range is
Up/Down Buttons
4.After modifying a component, press the Right arrow button to move to the next component to modify. Press the Left arrow button to return to a previous component.
5.Repeat steps 2 to 4 to modify the remaining components of the IP address.
6.Press the Right arrow button to move to the Subnet Mask IP number. The Subnet Mask is assigned values according to the IP address entered.
If you do not want to modify the Subnet Mask, press the Right arrow button until you reach the Default Gateway number. If no additional changes are required, skip to step 8.
7.Enter the IP address of the Default Gateway if the MCU is connected to a network other than the one used by the PC running the MGC Manager.
8.After completing the modifications of all numbers, press the Right arrow button (
) until OK is selected, and then press the Select (
) button. A notification that the system will be reset is displayed.
9.Press the Select (
) button to reset the system.
