CROSSRAMP: Press and hold the CROSSRAMP arrow keys to increase or decrease the ramp incline from 1 to 20 on the EFX5.35 or 1 to 14 on the EFX5.33 and EFX5.31.
Changes to the ramp incline are not immediate. It takes time for the lift to reach the target incline shown on the display.
Ramp changes occur only when the foot pedals are in motion. The number that appears on the display indicates the selected CrossRamp setting, not the degree of incline. There is not a
The CrossRamp setting affects the column height in the program profile. Refer to Diagram 12.
QUICKSTART: Press QUICKSTART to start your workout immediately using the Manual Program. Refer to Choosing QUICKSTART.
RESISTANCE: Press and hold the RESISTANCE arrow keys to increase or decrease the resistance in from 1 to 20.
Right Selection Key: Every time you press this key the display reflects your cumulative strides, your strides per minute, or your vertical gain. An LED lights and indicates which information is being displayed.
Owner’s Manual: Display Console | 24 |