M9.3x Low-Impact Treadmills Assembly Guide 2
Thank you for choosing Precor. For proper installation, please read
this guide thoroughly and follow the assembly instructions. If you do
not assemble the treadmill according to these guidelines, you could
void the Precor Limited Warranty.
Obtaining Service
You should not attempt to service the treadmill except for minor belt
adjustments and maintenance as described in the owner’s manual.
For information about product operation or service, refer to the
Precor web site at www.precor.com or call Precor Customer Support
at 1-800-347-4404. If any items are missing, contact the dealer from
whom you purchased the unit or call 1-800-4-PRECOR for the
dealer nearest you.
Unpacking the Equipment
The treadmill is carefully tested and inspected before shipment. The
unit is shipped in one box. Ask for help form two or more people to
unpack and assemble the treadmill.
Required Tools
• ½-inch box end or crescent wrench
• String
•Tape
• Wire tie cutter
Installation Requirements
Follow these installation requirements when assembling the unit:
•Assemble the unit near the location where you plan to use it.
•Provide ample space around the unit.
Open space around the unit allows for easier access.
•Set up the unit on a solid, flat surface.
A smooth, flat surface under the unit helps keep it level. A level
unit has fewer malfunctions.
•Open the box and assemble the components in the sequence
presented in this guide.
•Insert all bolts in the same direction.
For aesthetic purposes, insert all the bolts in the same direction
unless specified (in text or illustrations) to do otherwise.
•Leave room for adjustments.
Tighten fasteners (bolts, nuts, and screws), so the unit is stable,
but leave room for adjustments. Do not fully tighten fasteners until
instructed to do so.