6.When you are ready, press ENTER to move to the next display (error log).
Viewing the Error Log
ERROR LOG appears on the display followed by the first entry in the error log if there are any errors. Up to ten error codes can be retrieved.
If there are no errors in the log, you will see NO ERRORS displayed.
7.To view any additional error codes in the error log, use the arrow keys. Each error code specifies when it occurred, listing the odometer and hour meter values. Refer to Diagram 10.
Most recent error | The hour meter at the time |
| the error was detected. |
1: ER33 AT 12,345,678 MILES 1,714 HOURS
Error code | Odometer reading at the |
| time the error occurred. |
Diagram 10: Error log |
|
8.Copy the error code information to paper so you can provide it to Customer Support if needed. Be sure to copy it exactly as shown.
9.When you no longer need the information in the error log, press QUICKSTART to erase the error log. While the error log is displayed, maintain light pressure on the QUICKSTART key until CLEAR, and then OK appears.
Important: You cannot retrieve the error log once you have cleared it. You may want to resolve any issues you are experiencing with the treadmill before clearing the error log.
10.When you are ready, press ENTER to move to the next display (serial number).
Owner’s Manual: Advanced Programming and Troubleshooting | 41 |
