Precor M9.33 Advanced Programming and Troubleshooting

Owner’s Manual: Advanced Programming and Troubleshooting 37
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special key presses. Read this section if you want to:
• Change the display to U.S. Standard or Metric
• Enable or disable password protection
• View the odometer
• Display the number of hours you have used your treadmill
• View the software versions and part numbers
• Check the error log
• Display the serial number
Advanced Programming Tips
• Always start at the Precor banner.
• The advanced programming and diagnostic mode is
accessed by pressing the RESET key at the Precor
banner. The remaining key presses must occur quickly and
without pause.
• Use the ENTER, SELECT and arrow keys while in the
diagnostics mode.
• The function of the QUICKSTART key is disabled while in
diagnostics mode.
• Exit the diagnostics mode by pressing the RESET key for
two or more seconds. The display remains blank for one
second and any additional key presses are ignored.