2–Event Messages
Alarm Events
2-32 59060-07 D
(A1005.0106) (Fabric translation setup error, PLOGI from fc_id to fc_id OX_ID ox_id
rejected)
Meaning: A Port Login (PLOGI) from one transparent route endpoint to
another was rejected because of hardware resource limitations on
the TR_Port or the F/FL port involved in the mapping.
Action: If there are 32 active transparent routes on the TR_Port, reduce
the number of mappings on that port, or use a different TR port. If
there are 32 active transparent routes on the F/FL_Port, reduce the
number of mappings on that port.
(A1005.0107) (TR Proxy Login failed: wwn already logged into local fabric at FC-ID fc_id)
Meaning: A proxy for a device in a remote fabric could not be created in the
name server of the local fabric because a device with the same
port name was already logged in.
Action: Examine the adapters with the given WWN and determine which is
using the incorrect world wide name.
(A1005.0108) (TR Port internal error encountered)
Meaning: An internal inconsistency was detected by the switch firmware that
affected a transparent route.
Action: Contact your authorized maintenance provider.
(A1005.0109) (TR ignored if_zone and if_zone; port_wwn> shared but two TR ports
port_wwn, port_wwn used)
Meaning: The zone set contains inter-fabric zones (IFZ) that shared the
same device port name, but uses different TR_Ports on the same
switch.
Action: Remove one of the inter-fabric zones or modify them so that both
zones use the same TR_Port.
(A1005.010A) (Remote fabric attached to port does not support NPIV)
Meaning: A TR_Port could not log into a remote fabric because the remote
fabric port does not support N_Port ID Virtualization (NPIV).
Action: Enable NPIV on the switch attached to the TR_Port, or use a
different remote fabric switch port.
(A1005.010B) (IPSec configuration error: IKE Peer peer_name : error_description)
Meaning: An error occurred while processing the specified peer in a saved
IKE configuration. None of the configuration modifications have
been applied to the switch's active database.
Action: Correct the configuration and save it.