2–Event Messages
Alarm Events
2-34 59060-07 D
(A1005.0113) (TR Port removing Proxy for port_wwn logged in at FC-ID fc_id, duplicate
port name logged in at FC-ID fc_id)
Meaning: A device is logged in on another switch in the local fabric with the
same port WWN as a proxy for a device in a remote fabric. The
proxy created on the local switch has been removed.
Action: Examine the adapters with the given WWN and determine which is
using the incorrect world wide name.
(A1005.0115) (DCBX_TOO_MANY_NEIGHBORS error: Policy policy_name : reason)
Meaning: LLDP found too many neighbors on link, DCBX is disabled.
Action: DCBX is expected to run operate over a point to point link. LLDP
has detected multiple neighbors, so DCBX will operate as if no
DCBX peers are present until the condition is no longer present.
(A1005.0116) (DCBX_NEIGHBOR_LOST error: Policy policy_name : reason)
Meaning: LLDP found no neighbors on link, DCBX is disabled.
Action: No LLDP neighbor has been detected on the link, or an existing
neighbor has been aged out and removed. DCBX cannot enable
the link until neighbor information is refreshed.
(A1005.0117) (DCBX_PEER_UNADVERTISED error: Policy policy_name : reason)
Meaning: LLDP neighbor on link is not sending DCBX TLVs
Action: An LLDP neighbor is present on the link, but the LLDP PDU does
not contain any DCBX TLVs. DCBX cannot enable the link until
neighbor information is refreshed.
A1005.0118) (DCBX_PEER_UNADVERTISED error: Policy policy_name : reason)
Meaning: Peer on link has not enabled the DCBX [Priority Group|Priority
Flow Control] feature.
Action: An LLDP neighbor is present on the link, and the LLDP PDU
contains DCBX TLVs, but the specified feature is not advertised by
the peer. DCBX cannot enable the link until the feature is present.
A1005.0019) (DCBX_PEER_FEATURE_DISABLED error: Policy policy_name : reason)
Meaning: Peer on link has not enabled the [Priority Group|Priority Flow
Control] feature.
Action: An LLDP neighbor is present on the link, and the LLDP PDU
contains DCBX TLVs for the specified feature, but the feature is not
enabled by the peer. DCBX cannot enable the link until the feature
is present.