2–Event Messages
Alarm Events
2-52 59060-07 D
(A6001.0001) (cmon: insufficient memory)
Meaning: The Hotreset command has failed due to insufficient memory on
the switch. The switch has been returned to its state before the
Hotreset command was entered.
Action: If acceptable, enter the Reset Switch command to reboot the
switch. Contact technical support if a non-disruptive code load and
activation is required.
(A6001.0002) (cmon: blade failed NDCLA)
Meaning: The Non-Disruptive Code Load and Activation (NDCLA) has failed
on this I/O blade.
Action: None
(A6001.0003) (cmon: switch failed NDCLA)
Meaning: The Non-Disruptive Code Load and Activation (NDCLA) has failed.
The switch has performed a hard reset.
Action: None
(A6001.0004) (cmon: Blade was removed during NDCLA)
Meaning: An I/O blade was removed during the Non-Disruptive Code Load
and Activation (NDCLA).
Action: None
(A6001.0005) (Secondary CPU firmware update in progress, hotreset aborted.)
Meaning: The firmware image was being updated on the secondary CPU
when a hot reset was attempted.
Action: Wait for the firmware update to complete, then retry the hot reset.