2–Event Messages
Alarm Events
59060-07 D 2-33
(A1005.010C) (IPSec configuration error: IKE Policy policy_name : error_description)
Meaning: An error occurred while processing the specified policy in a saved
IKE configuration. None of the configuration modifications have
been applied to the switch's active database.
Action: Correct the configuration and save it.
(A1005.010E) (TR Proxy Login for port_wwn failed: native device with FC-ID fc_id is also a
proxy)
Meaning: A transparent route attempted to map a device in the local fabric
that is also proxy of a device in a remote fabric.
Action: Physically move the device from the remote fabric to the local
fabric.
(A1005.010F) (PLOGI S_ID fc_id D_ID fc_id OX_ID ox_id, no proxy for destination device on
this port)
Meaning: A Port Login (PLOGI) could not be translated because no proxy
was found for the destination address.
Action: Contact your authorized maintenance provider.
(A1005.0110) (PLOGI S_ID fc_id D_ID fc_id OX_ID ox_id, no proxy for source device on this
port)
Meaning: A Port Login (PLOGI) could not be translated because no proxy
was found for the source address.
Action: Contact your authorized maintenance provider.
(A1005.0111) (TR Port Name port_wwn found in local fabric, disabling Transp arent Routing
on this port, check ISL configuration, reset port to retry)
Meaning: The switch connected to the TR_Port is part of the local fabric.
Action: Remove the switch attached to the TR_Port from the local fabric or
disconnect the TR_Port (transparent routing is not needed to reach
devices in the local fabric).
(A1005.0112) (PLOGI S_ID fc_id D_ID fc_id OX_ID ox_id rejected during NDCLA)
Meaning: A port login (PLOGI) was received for transparent routing after the
Non-Disruptive Code Load and Activation (NDCLA) had begun. An
attempt was made to send a reject.
Action: Retry the port login after the NDCLA is complete.