2–Event Messages
Alarm Events
59060-07 D 2-51
(A4000.0001) (threshold of value hit rising trigger trigger_number in value second window on
port port_number - ALARM SET
Meaning: The switch exceeded the specified threshold for the rising trigger in
the specified sample window.
Action: Investigate the specified port for problems or adjust the rising
trigger or sample window.
(A4004.0001) (Decode errors of 4024 hit rising trigger 500 in 1 second window on this port
- ALARM SET)
Meaning: Decode errors have exceeded the threshold set during the
specified sample window interval. If the number of decode errors
decreases below the lower threshold during the next sample
window interval, then the alarm condition will clear.
Action: Investigate the specified port for problems or adjust the rising
trigger or sample window.
(A4004.0002) (Decode errors alarm on this port has been in ALARM_SET state for 3
seconds - PORT DOWNED)
Meaning: A port has failed the decode error threshold limit for 3 consecutive
sample window intervals and has been disabled.
Action: Reset the port, reactivate the switch configuration, set the port
state to online, or reset the switch.
(A4084.0002) (Decode errors error threshold monitoring is being reset on this port -
ALARM CLEARED)
Meaning: The number of decode errors has decreased below the lower
threshold, thus clearing the decode error threshold alarm.
Action: None
(A6000.0002) (Configured port speed for port port_number not compatible with media.)
Meaning: The transceiver in the named port is not capable of transmitting at
the configured port speed.
Action: Reconfigure the port speed or replace the transceiver.
(A6000.0005) (Configured port type for port port_number not compatible with media.)
Meaning: Configured port type is not compatible with the type of media
installed.
Action: Check media to make sure it is the correct type of media for the
configured port type. If configured to Ethernet port type, make sure
Ethernet media installed.