2–Event Messages
Critical Events
59060-07 D 2-57
(C) (8400.0044) (Switch) (A reset is required since a Power On Self Test (POST) has never
run on these ports)
Meaning: After upgrading ports, it may be necessary to reset the switch so
that the POST can run on the newly licensed ports.
(C) (8400.0045) (Switch) (Upgrading License for 4G capability)
Meaning: Installation of the license key that grants 4-Gbps transmission
speed capability to the Fibre Channel ports is in progress.
(C) (8400.0046) (Switch) (Upgrading License for multiple ISL capability)
Meaning: The switch has been upgraded to allow for multiple inter-switch
links.
(C) (8400.0047) (Switch) (New licenses are being installed
Meaning: New licenses are being installed.
(C) (8400.0049) (Switch) (The Configuration Wizard from ip_address is exiting - switch
configuration may have changed)
Meaning: Changes made to switch may result in loss of communication with
the switch.
(C) (8400.004B) (Switch) (Attempted to license modes on an unsupported switch type)
Meaning: An attempt was made to install a license key for a feature that is
not supported on the switch.
(C) (8400.004C) (Switch) (Services setup is changing - may lose connection - admin being
released automatically)
Meaning: The Services configuration is changing and this may result in the
loss of a connection.
(C) (8400.004D) (Switch) (ntpdate: no server suitable for synchronization found)
Meaning: The Network Time Protocol (NTP) server was not found.
(C) (8400.004E) (Switch) (ntpdate: synchronization lost)
Meaning: The Network Time Protocol (NTP) server synchronization was lost.
(C) (8400.0050) (Switch) (Upgrading License allowing manufacturing setup mode
capability)
Meaning: The license upgrade was successful.
(C) (8400.0052) (Switch) (Upgrading License for EFCM capability)
Meaning: The license upgrade was successful.