2–Event Messages
Warning Ev ents
59060-07 D 2-69
(W) (8400.0092) (IPSec association association_name has expired)
Meaning: The configured lifetime for the specified IPSec association has
expired, and the association has been deleted from the switch's
active database.
(W) (8400.0093) (IPSec policy policy_name has expired)
Meaning: The configured lifetime for the specified IPSec policy has expired,
and the policy has been deleted from the switch's active database.
(W) (8400.0094) (Ignoring IKE policy policy_name with non-local address IP_address)
Meaning: The specified IKE policy has a local address that is not an IP
address on the switch. The IKE policy is ignored.
(W) (8700.0009) (EPort) (Port: port_number) (Inter-Switch Link (ISL) communication error)
Meaning: The remote switch has lost the local switch’s identity.
(W) (8700.000A) (EPort) (Port: port_number) (No response from remote switch, resetting
Inter-Switch Link (ISL))
Meaning: No communication has been received from the remote switch for
some time, indicating that it may not be functioning properly. The
E_Port will be reset in an attempt to reestablish the ISL.
(W) (8B00.000D) (SMTP servers in the CallHome setup are using duplicate IP address and
port number pairs)
Meaning: The Call Home service configuration must not duplicate both the
Simple Mail Transfer Protocol (SMTP) server IP address and port
number values. However, the configuration may duplicate either
the server IP address or the port number. For better fault tolerance,
the SMTP servers should run on different physical systems. The
port number value of 25 is the well-known service number for the
SMTP protocol.
(W) (8B00.000E) (Message queue is empty, cancelling attempts to retry sending last
message)
Meaning: The Call Home service was waiting to resend a message when the
message expired, or there was a request to clear the queue of all
messages.
(W) (8B00.000F) (Will retry sending via SMTP server ip_address, port port_number, after
seconds seconds)
Meaning: After a communication failure or Simple Mail Transfer Protocol
(SMTP) protocol error, the switch attempts to resend the e-mail
message using the specified server, port, and delay.