2–Event Messages
Critical Events
2-60 59060-07 D
(C) (8400.006A) (Switch) (Upgrading License for Fabric Security)
Meaning: The Fabric Security Bundle license was applied successfully.
(C) (8400.006B) (Switch) (Upgrading License for CLI Extended Credits capability)
Meaning: The CLI Extended Credits license was applied successfully.
(C) (8400.0070) (blade_ID blade is operational)
Meaning: The specified blade is powered on and fully operational.
(C) (8400.0071) (Extraction latch was opened)
Meaning: The latch has been pulled down. The blade is not accessible.
(C) (8400.0072) (Extraction latch was closed)
Meaning: The latch has been closed. The blade is inserted into the chassis.
(C) (8400.0073) (Blade was powered off)
Meaning: The blade is powered off after a latch pull.
(C) (8400.0074) (Blade was powered on)
Meaning: The blade was powered on after an extraction latch was closed.
(C) (8400.0075) (Upgrading License for Fault Tolerant capability)
Meaning: The Fault Tolerant license was applied successfully.
(C) (8400.0076) (Upgrading License for HyperStack(tm) capability)
Meaning: The HyperStack license was applied successfully.
(C) (8400.0079) (Canceling config edit mode as a result of a CPU switchover)
Meaning: A CPU blade switchover occurred while a Config Edit session was
open.
(C) (8400.007A) (Resaving the zoning config as a result of a CPU switchover)
Meaning: A CPU blade switchover occurred while saving the configured
zoning database. A save ‘retry’ is occurring.
(C) (8400.007B) (Resaving the security config as a result of a CPU switchover)
Meaning: A CPU blade switchover occurred while saving the security
database. A save ‘retry’ will now occur.
(C) (8400.007C) (CPUn) (Switching over to Secondary blade_ID)
Meaning: Control is transferring from the primary CPU to the specified
secondary CPU blade.