Q-Logic IB0056101-00 G manual Ipathcheckout Options, Command Meaning

5 – Software Installation Customer Acceptance Utility

S

6.Verifies the ability to mpirun jobs on the nodes.

7.Runs a bandwidth and latency test on every pair of nodes and analyzes the results.

The options available with ipath_checkout are shown in Table 5-6.

	Table 5-6. ipath_checkout Options
Command		Meaning
-h, --help		These options display help messages describing how a com-
		mand is used.
-v, --verbose		These options specify three successively higher levels of
-vv, --vverbose		detail in reporting test results. There are four levels of detail
-vvv, --vvver-		in all, including the case where none of these options are
bose		given.
-c, --continue		When this option is not specified, the test terminates when
		any test fails. When specified, the tests continue after a fail-
		ure, with failing nodes excluded from subsequent tests.
-k, --keep		This option keeps intermediate files that were created while
		performing tests and compiling reports. Results will be saved
		in a directory created by mktemp and named
		infinipath_XXXXXX or in the directory name given to
		--workdir.
--workdir=DIR		Use DIR to hold intermediate files created while running
		tests. DIR must not already exist.
--run=LIST		This option runs only the tests in LIST. See the seven tests
		listed previously. For example, --run=123will run only
		tests 1, 2, and 3.
--skip=LIST		This option skips the tests in LIST. See the seven tests listed
		previously. For example, --skip=2457will skip tests 2, 4, 5,
		and 7.
-d, --debug		This option turns on the -xand -vflags in bash(1).

In most cases of failure, the script suggests recommended actions. Please see the ipath_checkout man page for more information and updates.

Also refer to the Troubleshooting appendix in the QLogic HCA and InfiniPath Software User Guide.

5-32 IB0056101-00 G