Q-Logic IB0056101-00 G manual Check for Missing Files or RPMs

A

5 – Software Installation Downloading and Unpacking the InfiniPath and OpenFabrics Software

NOTE:

The files can be downloaded to any directory. The install process will create and install the files in the correct directories. The locations of the directories after installation are listed in “Installed Layout” on page 5-9.

The RPMs are organized as follows:

InfiniPath_license.txt,LEGAL.txt (top level)

Documentation/

InfiniPath/

InfiniPath-Devel/

InfiniPath-MPI/

OpenFabrics/

OpenFabrics-Devel/

OpenSM/

OtherHCAs/

OtherHCAs-Devel/

OtherMPIs/

A complete list of RPMs is in “RPM Descriptions” on page C-1.

Check for Missing Files or RPMs

Run the rpm command with the --verifyoption to check if there are files missing from the RPMs. For example:

$ rpm -a --verify ’InfiniPath-MPI/mpi*’ ’InfiniPath/infinipath*’

In the case of OpenFabrics RPMs, the verification command is slightly different, since these RPMs have many different prefixes:

$ rpm --verify rpm_name_pre

rpm_name_pre is the descriptive name that precedes the version and repository identifiers in an RPM. For example:

$ rpm --verify libibverbs

This command verifies the contents of:

libibverbs-2.2-xxx.1_1.yyy.x86_64.rpm

The rpm command cannot check for missing RPMs. Use ipath_checkout after installation to flag missing RPMs. See “Adapter Settings” on page 5-30for more information.

IB0056101-00 G 5-5