Q-Logic IB0056101-00 G manual skip lam -- package-lam-gnu/package post set

A

5 – Software Installation Additional Installation Instructions

<package>-libipathverbs-devel</package> <package>-libipathverbs</package> <package>-libmthca</package> <package>-librdmacm</package> <package>-libsdp</package> <package>-mstflint</package> <package>-openib-diags</package> <package>-opensm-devel</package> <package>-opensm-libs</package> <package>-opensm</package> <package>-srptools</package> <package>-tvflash</package>

<!-- skip lam --> <package>-lam-gnu</package>

<post>

set -x

IPLOG=/root/InfiniPathextend-bash-compute.log touch $IPLOG

echo ======InfiniPath-messages=================== >> $IPLOG

echo ’# INFINIPATH_ULIMIT_INSTALL_COMMENT; used by InfiniPath install, do not remove’ >> /etc/initscript

echo ’# This allows locking of up to 128MB of memory per process. It only’ >> /etc/initscript

echo ’# takes effect after a reboot, or "init 1", followed by "init 3"’ >> /etc/initscript

echo "ulimit -l 131072" >> /etc/initscript echo ’eval exec "$4"’ >> /etc/initscript

#the kernel must match the smp kernel you give below. uname -r

export KVER="2.6.9-42.0.2.ELsmp" /usr/src/infinipath/drivers/make-install.sh >> $IPLOG

chkconfig --level 123456 cpuspeed off <!--

Inserting a post installation script here. This

code will be executed on the destination node AFTER the packages have been installed.

-->

<file name="/etc/rc.d/rocksconfig.d/post-97-infinipath"

IB0056101-00 G 5-39