Q-Logic IB0056101-00 G OpenFabrics RPMs, Table C-4. InfiniPath-MPI/RPMs, RPM Name, Front End

C – RPM Descriptions OpenFabrics RPMs

S

The InfiniPath-MPI/RPMs are listed in Table C-4.

Table C-4. InfiniPath-MPI/RPMs

RPM Name	Front End	Compute	Development
mpi-benchmark-2.2-xxx_yyy.x86_64.rpm	Optional	Required	Optional
MPI benchmark binaries
mpi-frontend-2.2-xxx_yyy.i386.rpm	Required	Required	Optional
MPI job launch scripts and binaries,
including mpirun and MPD
mpi-libs-2.2-xxx_yyy.i386.rpm	Optional	Required	Required
Shared libraries for MPI

OpenFabrics RPMs

OpenFabrics and OpenSM are optional components. For ease of installation, QLogic recommends that all of the OpenFabrics RPMs listed in Table C-5and Table C-6be installed on all nodes. The development RPMs in Table C-7are only needed on the nodes where OFED programs are compiled. The opensm package in Table C-8should be installed only on the node that will be used as a subnet manager. The packages in Table C-9should be installed only if other HCAs are used. The packages in Table C-11should be installed if other MPI implementations are desired.

Table C-5. OpenFabrics Documentation/RPMs

RPM Name	Comments
ofed-docs-2.2-xxx.1_3.yyy.x86_64.rpm	Optional for
OpenFabrics documentation	OpenFabrics

Table Notes

OpenFabrics documentation is installed in the same directory as the InfiniPath documentation.

Table C-6. OpenFabrics/RPMs

RPM Name	Comments
dapl-2.2-xxx.1_2_5.yyy.x86_64.rpm	Optional for
uDAPL 1.2 support	OpenFabrics
dapl-2.2-xxx.2_0_7.yyy.x86_64.rpm	Optional for
uDAPL 2.0 support	OpenFabrics

C-4 IB0056101-00 G