Appendix B Traffic Separation

RIC-155Installation and Operation Manual

 

 

MNG

Data

Host

Uplink

Figure B-2. Physical Port Access –MNG Only

All

When the physical port access is set to All, the internal bridge connections allow both local and remote RIC-155s to be managed via the MNG and DATA ports.

MNG

Data

Host

Uplink

Figure B-3. Physical Port Access – All

Local Mng Only

When the physical port access is set to Local Mng Only, the internal bridge connections allow only the local RIC-155 to be managed via the MNG and DATA ports.

MNG

Data

Host

Uplink

Figure B-4. Physical Port Access – Local Mng Only

B.2 Port-Based/VLAN-Based Traffic Separation

The main purpose of traffic separation is to prevent management frames from entering data ports of the local and remote units. The traffic separation mechanism can be further improved by using internal VLAN-based routing. Management and data Ethernet ports receive unique VIDs (VLAN Identifiers), which define frame routes inside the bridge.

Default port VIDs are set as follows:

Management port – 1

Data port – 2.

B-2

Port-Based/VLAN-Based Traffic Separation

Page 76
Image 76
RAD Data comm RIC-155 operation manual Port-Based/VLAN-Based Traffic Separation, All, Local Mng Only