RAD Data comm operation manual Displaying the RIC-155 Status, Displaying the System Status

RIC-155Installation and Operation Manual Chapter 4 Configuration

4.5Displaying the RIC-155 Status

The RIC-155 software displays the converter system and physical port information. This section describes only status information of the RIC-155 device. For description of RIC-155 alarms, refer to Chapter 5.

The status information is available via the Monitoring menu.

Displaying the System Status

To display the system information:

1.Follow the path: Monitoring > System Monitoring > System Status. The first page of the System Status screen appears (see Figure 4-17).

2.Type N (next) to display the second page of the System Status screen (see Figure 4-18).

3.Type P (previous) to return to the first page.

	System Status		RIC-155
			(Loop-Back Timing)
	Clock Source: .....>
	SW Version:		(1.1)
	HW Version:		(1.0B)
	BOOT Version:		(1.40)
	System CPLD Version: ...(1.02)
	POS CPLD Version:	...(255.255)
	Switch device ID:		(52 - 88E6063)
	Switch revision ID:		(1.00)
	Switch SW version:		(3.01)
	POS device ID: ....		(1 - CX29701)
	POS revision ID: ..		(3.00)
	...(N)
	ESC-prev.menu; !-main menu; &-exit
	Figure 4-17. System Status Screen, Page 1
	System Status		RIC-155
	... (P)		(5.82)
	POS SW version: ...			(AC)
	Power Supply Type: ......>
	MAC Address:			(0020D220A209)
	IP Address:			(172.17.161.98)
	Number of Ethernet ports:>			(2)
	Alarm Indication: .......>			(Normal)
	Hardware Status:			(OK)
	System Up Time:			<:Time 00:00:00: Day 0/00/00:>
	ESC-prev.menu; !-main menu; &-exit
	Figure 4-18. System Status Screen, Page 2
Note	For system alarm and log file description, refer to Chapter 5.

Displaying the RIC-155 Status 4-15