RAD Data comm RIC-155 Additional Tasks, Changing the Password, STM-1/OC-3c Port Status Parameters

Chapter 4 ConfigurationRIC-155Installation and Operation Manual

	Table 4-2.	STM-1/OC-3c Port Status Parameters
Parameters	Description	Values
Uplink Connector	Type of the	• Two BNC – BNC coaxial connector
Type	STM-1/OC-3c	• SC – Fiber optic SC connector
	interface connector
		• ST – Fiber optic ST connector
		• FC – Fiber optic FC connector
		• SF1 – SF1 fiber optic interface
		• SF2 – SF2 fiber optic interface
		• SF3 – SF3 fiber optic interface
Section	SONET/SDH	•	Normal – Normal
	section status	• LOS – Loss of Signal is detected
		• LOF – Loss of Frame is detected
Line	SONET/SDH line	•	Normal – Normal
	status	• AIS – Alarm Indication Signal is detected
		• RDI – Remote Defect Indication is detected
Path	SONET/SDH path	•	Normal – Normal
	status	• AIS – Alarm Indication Signal is detected
		• RDI – Remote Defect Indication is detected
		• LOP – Loss of Pointer is detected
		• Trace Mismatch – Tx path trace mismatch is detected
Line Indication		• Normal – Primary/management link operates properly
		• Major – A major alarm is detected on the uplink
		• Minor – A minor alarm is detected on the uplink

4.6 Additional Tasks

Changing the Password

From the User Access menu change current passwords and display the list of users and their access levels. Currently the following permanent user names are available (case-sensitive): SU and USER with 1234 as default password.

To change the current password:

1.Follow the path: Configuration > System Configuration > Management > Management Access > User Access.

The User Access menu is displayed (see Figure 4-21).

2.From the User Access menu, select the following:

Change Password to assign a new password to the existing user name (SU or USER). Password can contain up to eight characters.

4-18 Additional Tasks