Radio Shack 43-5862 owner manual Command Function

Beyond the Basics

4.Start to enter a remote command sequence from the chart below within 15 seconds. After the first command, you have two seconds to enter the second command.

Command	Function	Command	Function
0 then 1	Repeat a	0 then 6	Answering
	message*		machine on
0 then 2	Play incoming	0 then 7	Memo record
	messages		start/stop**
0 then 3	Skip a message	0 then 8	Greeting
			message record
			start/stop**
0 then 4	Delete a message	0 then 9	Answering
			machine off
0 then 5	Stop operation	1 then 0	Help

*If you press 0 then 1 in the first four seconds of a message, the answering machine skips to the previous message. If you press 0 then 1 after the first four seconds of a message, the answering machine repeats the current message.

**When the first time you enter the Memo record or

Greeting message record command, it starts the recording. If you want to stop the recording, enter the same command sequence again, or press 0, then 5 (Stop operation).

5.When you finish, you will hear intermittent beeps indicating that the answering machine is in the command-waiting mode. Enter another command from the chart within 15 seconds.

6.Hang up to exit the remote operation. The answering machine automatically returns to its normal standby setting.

85