Beyond the Basics
To Protect the Station from Monitoring Request
If you want to prevent other handsets or the base from monitoring the station, follow these steps:
1.HANDSET: Press the MENU soft key, and then select the HANDSET SETUP menu.
BASE: Press MENU/SELECT. Select the SYSTEM SETUP menu, and then BASE submenu.
2.Select the ROOM MONITOR submenu.
3.Move the cursor to select OFF.
4.HANDSET: Press the OK soft key.
BASE: Press MENU/SELECT or the SELECT soft key.
• For added mobility and convenience, you can
NOTES use a handset placed in another room/location (where no station was installed) to function as a microphone to pick up sounds.
•This feature only works when handset(s) to be used for this feature are within the range of the base.
•If you select a handset in step 2 and the handset is out of range, UNAVAILABLE appears in the handset display. (From the base, NO SIGNAL PRESS [HELP] appears.) Then the operation will be canceled.
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can switch to tone dialing after the call connects. This feature is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc.
1.Make your call normally.
2.Once your call connects, press */TONE on the handset or the base.
66
