Radio Shack 43-5862 owner manual

Beyond the Basics

2.Move the cursor to select BASE UNAVAILABLE and then press the OK soft key.

3.Move the cursor to select YES, and then press the OK soft key.

4.ARE YOU SURE? appears on the display. Move the cursor to select YES, and then press the OK soft key.

5.You will hear a confirmation tone, and the handset deletes its own base information without contacting the base. The handset displays the message, MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL.

6.On the base you want to use, disconnect the AC adapter.

7.While holding END/PAGE, connect the AC adapter. Keep pressing END/PAGE until the CHARGE indicator starts to blink.

8.Place the handset on the base and wait until the CHARGE indicator stops flashing.

This erases all the handset registration data on the base, not limited to the handset you placed at Step 8 above. You need to register other handset(s) also if you have more than one. First de-register the handset as in Step 1 and 2 above, and then place it on the base.

If you have trouble with de-registration, take your base and handset (including accessory handset(s) if you have) to your local RadioShack store or call 1-800-The Shack (843-7422) for assistance.

Also, when you request repair or service, please be sure to bring in the entire system (including accessory handset if used) so we can keep your registration data intact.

91