Basics Connecting/Charging the Battery Pack | Radio Shack 43-5862

The Basics

Connecting/Charging the Battery Pack

The phone comes with a rechargeable nickel-metal hydride (Ni- MH) battery pack in the handset. Before using your phone, you must connect the battery pack. Then charge it for about 15 - 20 hours.

1.Press down and slide off the battery compartment cover.

2. Lift the battery pack out of the compartment.

3. Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way). Then place the battery pack in the compartment.

4.Replace the cover.

5.To charge the battery pack, place the handset on the base. The CHARGE indicator on the base lights.

•Recharge the battery pack when LOW BATTERY flashes on the display.

•If you have any trouble replacing the battery pack, take the phone to your local RadioShack store for assistance.

Notes on Recharging

•If the battery pack becomes weak during a call, LOW BATTERY flashes. When this happens, you cannot make a call until you recharge the battery pack.

IMPORTANT: Be sure the battery pack is properly connected before charging. The CHARGE indicator lights when the handset is on the base, even if the battery pack is not connected.

18

Image 18

Radio Shack 43-5862 owner manual Basics Connecting/Charging the Battery Pack

Contents

43-5862 Contents Adjusting the Ringer, Earpiece Speaker Volume Redialing a Number Setting Up the Answering Machine Features Basics Introduction Important Information FCC Statement Risk of Electric Shock do not Open Important Safety Instructions Basics Surge Protection Read This Before Installation Important Caller ID Information 12. */TONE key Speaker key Controls & FunctionsHandset REDIAL/PAUSE key INTCM/HOLD key intercom/hold BACK/HOLD/INTERCOM key Flash key and indicator speaker/flashBase MENU/SELECT key Installation Selecting a Location Connecting the Phone Base Usoc number of the jack to be installed isRJ11C or RJ11W for a wall plate jack On a Wall Plate or Wall Basics Basics Connecting/Charging the Battery Pack Basics Backup battery pack is not installed Appears in the base display as a warning thatBase unit To Attach the Belt Clip Basics Installing a Belt ClipUsing a Headset To Remove the Belt Clip Using the Interface Reading the Handset DisplayIcon Status Description Basics Reading the Base Display Basics Standby Screen During a call Basics Soft Key FunctionStandby HandsetBase Using the Four-Way Function Key Using the Handset Menus Basics Using the Base Menus Basics Entering Text from Your Phone From the Handset Basic SetupChanging the Dial Mode From the Base For the Handset Display Setting the Date and TimeBasics Selecting a Language for the Display For the Base Display Activating Caller ID on Call Waiting and Call Waiting Deluxe Activating the Key Touch Tone For the Handset Keypad Adjusting the LCD contrast For the Base Keypad Adjusting the Earpiece Volume Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Ringer Volume Adjusting the Speaker Volume Using the T-coil feature may shorten your battery’s Coil Handset Only Beyond the Basics Adding Optional Accessory HandsetsRegistering Accessory Handsets Ten Multi-Handset Expandability Handset Setting Up the PhonebookBeyond the Basics Resetting Handsets Base Using the Phonebook Base Press MENU/SELECT or the Select soft keyHandset Press Base Press END/PAGE Beyond the Basics Creating Phonebook Entries Enter the name for this entry Edit NameEnter the number for this entry Edit Number Beyond the Basics Assign this entry to a Speed Dial number Speed Dial When the shared memory on the handset is fullFinding and Viewing a Phonebook Entry Oldest Caller ID message is overwritten Editing Phonebook Entries Storing Caller ID or Redial Numbers in the PhonebookTo open the Caller ID list Deleting Phonebook Entries Deleting Individual Phonebook EntryIf the Caller ID message was received as a private Copying Individual Phonebook Entry Copying Phonebook Entries to Another StationDeleting All Phonebook Entries Copying All Phonebook Entries Customizing Your Phone Naming Phonebook Groups Base OnlyChanging the Handset Banner Selecting a Ring Tone Melodies For the Base Activating Personal RingFor the Handset Ringers Activating Auto Talk Handset Only Activating Any Key Answer Handset Only From Using Your PhoneMaking a Call Handset Speaker Phone Beyond the Basics Answering a Call Hanging UpMaking a Call from the Phonebook Testing Stored Emergency Numbers Making a Call with Speed Dial Using Caller ID and Call Waiting Talking Caller ID Base Only Using the Caller ID List Making a Call from a Caller ID Record Deleting Caller ID RecordsDeleting Individual Caller ID Record Using Call Waiting Deleting All Caller ID Records Beyond the Basics Using Call Waiting Deluxe Base Press MENU/SELECT or the Options soft key Making a Call from a Redial Record Using the Redial ListRedialing a Number Handset Press /FLASH or Speaker Deleting All Redial Records Base Only Finding a Lost HandsetDeleting a Redial Record If the number exceeds 32 digits, only the first Using Hold, Conference and Transfer Placing a Call on HoldConferencing Transferring a Call Answering a Transferred CallHandset Press INTCM/HOLD Base Press BACK/HOLD/INTERCOM Muting the Ringer One Call Only Using Special FeaturesDo Not Disturb All Calls Base Press /FLASH or BACK/HOLD/INTERCOM Privacy Mode Beyond the Basics Muting the Microphone Making a DirectLink Call Exiting a DirectLinkTM Communication Beyond the Basics Intercom Making an Intercom Room/Baby Monitor Answering an IntercomBase Press MENU/SELECT Tone Dialing Switch Over To Protect the Station from Monitoring Request Seven-Digit Dialing Beyond the Basics Inuse Line Setup from the Base Traveling Out of Range Using the Answering Machine Interface Setting Up the Answering MachineFeatures Using Setup Menus Handset Operation From the Handset Beyond the Basics Selecting a Language for Announcements Recording a Personal Greeting Selecting a Greeting Deleting Your Personal Greeting Base Only Beyond the Basics Setting the Number of Rings Setting the Record Time or Announce Only Activating the Message Alert Activating Call Screening Using the Answering Machine Turning Your Answering Machine On and OffTurning On Reviewing Messages Turning Off Your From the base From the handsetPlaying Messages Screening Calls Beyond the Basics Recording a Conversation Starting a recordingStopping a recording Recording a Voice Memo Starting a memoStopping a memo Message Alert Operating the Answering Machine While You Are Away from Home Command Function Troubleshooting Symptom Suggestion Charge the battery in the handset See Setting the Date and Time on Incoming messages may be too Service and Repair Appendix Handset-Base Registration Care Beyond the Basics Glossary Index Beyond the Basics Memo RadioShack Corporation