![](/images/new-backgrounds/1251230/251230125x1.webp)
Beyond the Basics
DirectLinkTM Communication Feature (Handset Only)
A pair of handsets (or two pairs of handsets at one time) can function as
1.Press the MENU soft key.
2.Select DIRECTLINK MODE menu. Then press the OK soft key. The display shows TO ENTER DIRECTLINK MODE PRESS
[ENTER].
3.Press the ENTER soft key. You will hear a confirmation tone, and DIRECTLINK MODE COMPLETE appears in the display.
Making a DirectLink Call
1.To call another handset with DirectLink communication, press the DirectLink soft key.
2.Move the cursor to select the handset you want to call, and then press the OK soft key. If the other handset is out of range or not set to DirectLink communication, the display shows OUT OF RANGE.
3.On the receiving handset, press /FLASH or the ANSWER soft key.
4.To end the call, press or the END soft key.
Exiting a DirectLinkTM Communication
While the handset is using DirectLink communication, the display shows DIRECTLINK MODE; this means the handset cannot make or receive normal phone calls. To exit the DirectLink feature and return to standby, press the CANCEL soft key and then press the OK soft key, or return the handset to the cradle. DIRECTLINK MODE CANCEL appears in the display.
63