Renesas REJ10J1837-0100

High-performance Embedded Workshop 4. Using the Editor

REJ10J1837-0100 Rev.1.00 Nov. 16, 2008

The High-performance Embedded Workshop keeps track of the last files that you have opened and adds them to the

File menu under the [Recent Files] sub-menu.

To open a recently used file

Select [File -> Recent Files] and from this sub-menu select the desired file.

4.3.5 Closing files

To close an individual file

Select one of the following operations:

• Double-click the Editor window’s system menu (located at the top left of each window), OR

• Click on the Editor window’s system menu (located at the top left of each window) and select the Close menu

option, OR

• Ensure that the window that you want to close is the active window and then press CTRL+F4, OR

• Ensure that the window that you want to close is the active window and then select [File -> Close], OR

• Click on the Close button (located at the top right of each window).

To close all files

Select [Window -> Close All].

If you attempt to close an edited file that is not saved, a confirmation dialog box appears asking if you wish to save the

file.

• Clicking No closes the file without saving.

• Clicking Cancel returns to the editor window.

• Clicking Yes closes the file by overwriting the contents. If the file has the read-only attribute, a confirmation

dialog box appears asking if you wish to save the file as another name.

• Clicking Yes opens the Save file dialog box. Change the file name before saving.

• Clicking No closes the file without saving.

• Clicking Overwrite closes the file by overwriting the contents.

• Clicking Cancel returns to the editor window.