Renesas REJ10J1837-0100 High-performance Embedded Workshop 17. Using the Debugger , REJ10J1837-0100 Rev.1.00 Nov. 16, 2008 311

High-performance Embedded Workshop 17. Using the Debugger

REJ10J1837-0100 Rev.1.00 Nov. 16, 2008

311

Lock Refresh - - Disables refresh of the Memory window.

Auto Refresh *2 - Regularly refreshes the Memory window.

Refresh Interval *2 - Specifies the refresh interval.

1byte - Data is displayed in 1-byte units.

2bytes - Data is displayed in 2-bytes units.

4bytes - Data is displayed in 4-bytes units.

Data Length

8bytes - Data is displayed in 8-bytes units.

Hex - Data is displayed in hexadecimal.

Dec - Data is displayed in decimal.

Signed Dec - Data is displayed in signed decimal.

Oct - Data is displayed in octal.

Radix

Bin - Data is displayed in binary.

ASCII - Displays memory as ASCII characters (default).

SJIS/JIS/UNICODE/EUC - - Not supported.

Float - Displays memory as single-precision floating point.

Double - Displays memory as double-precision floating point.

16bit Fixed - Displays memory as 16 bit fixed.

32bit Fixed - Displays memory as 32 bit fixed.

24bit Accum - - Displays memory as 24 bit accumulate.

Code

40bit Accum - - Displays memory as 40 bit accumulate.

Label - Switches display or non-display of Label area.

Layout

Code - Switches display or non-display of Code area.

Column - Changes the number of digits displayed.

Coverage *1 Enable - Switches display or non-display of measurement result.

Save Saves memory contents in a file.

Load Loads a memory area contents from a file.

Split - - Splits up the window display.

Toolbar display - - Shows or hides the toolbar.

Customize toolbar - - Customizes toolbar buttons.

Note: *1. Support for this function depends on the debugger. *2. Available only when the debugger supports this function. 17.3.2 Modifying memory contents To change the contents of memory, follow the procedure below. • In-place edit in the Data column.