High-performance Embedded Workshop 17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
268
7. Specify the debugger targets in Step 7.
Targets: Sets the debugger targets. Select (by checking) the debugger targets. No selection or a
selection of more than one target is possible.
Target type: Specifies the type of the targets displayed in Targets.
Target CPU: Specifies the CPU of the targets displayed in Targets.
Note:
The endian type selected in step 2 will be applied to the compiler settings. This is separate from the endian type of the
debugger target selected in step 7.
To move to Step 8, click the Next> button in Step 7.