4.Place the paper into the tray.
NOTE:
The paper should be loaded no higher than the Max. level indicator. The Max. level indicator is located inside the tray.
5.Close the tray.
6.If you set the sensor plate to triangle in Step 3, select the paper size from the OCP by making the following selections:
Printer/Paper Source/Paper Size/tray number/paper size
7.Adjust the paper weight. The default paper weight is 20 lb. bond. If necessary, change the paper weight by making the following selections:
Printer/Paper Source/ /Paper Weight/tray number
8. Select Index, Bond, or g/m2, then use the keypad to input the weight and press .
OG
L
Paper Handling
0 1
