Clearing Paper Jams
This section addresses printer paper jams only. If a paper jam occurs in the finisher, refer to your
The location of a paper jam is displayed on the OCP.
When clearing a paper jam, remove paper that is located in the Vertical Path Cover area first, then clear the remaining paper as indicated on the OCP display..
NOTE:
The Vertical Path Cover is also referred to as the “Input Station Cover” (IS Cover).
Vertical Path (IS) Cover
Follow the steps below to clear paper from the Vertical Path Cover
1.Open the Vertical Path Cover and remove the jammed paper. Paper along the paper path is automatically ejected from the Vertical Path Cover.
2.Close the Vertical Path Cover.
3. Touch on the OCP to clear any error messages.
4-18 Care and Maintenance
OG
L
0 1
