Ricoh 70 manual Vertical path cover

Message		Description	Corrective Action
		Passwords are for use by System	Contact your System Administrator for
Enter new password again		Administrators and Service
			additional information.
		Technicians only.
		You must provide the service	Contact your System Administrator if
Enter service password		password to gain access to the	you need access to menu items that
		selected menu item.	are password protected.
		You must supply the system password	Contact your System Administrator if
Enter system password		to gain access to the selected menu	you need access to menu items that
		item.	are password protected.
Entrance Paper Guide Open		The Entrance Paper Guide is located	Close the guide completely, then close
		behind Front Cover R of the Publishing
Close Guide		Finisher.	the cover.
Finisher Front Cover Open		The front cover of the Finisher is open.	Close the cover.
Close Cover	E03F
Front Cover Open		Self-explanatory.	Close the cover.
Close Cover	E043
Fuser Unit End of Life		The fuser unit needs to be replaced.	Contact your authorized Service
Replace Fuser Unit	E015		Technician.
Fuser Web End of Life		The fuser cleaning web needs to be	Replace the Fuser Cleaning Web.
			Printing will resume when the Fuser
Replace Fuser Web	E014	replaced.
			Cleaning Web is replaced.
HCF Open	E023	The door of the high capacity feeder is	Close the door.
Close Tray		open.
HCF Top Cover Open		Self-explanatory.	Close the cover.
Close Cover	E046
Heater Off Mode		Status message	None
Input Keycode		A valid keycode is required to activate	Contact your System Administrator or
		this feature.	authorized Service Technician.
Input Station Cover Open		The IS cover is also referred to as the	Close the cover.
Close Cover	E044	vertical path cover.
Insufficient Disk Space		There is not enough space for the	Increase disk space or send job
		requested operation. Only one copy is
One Copy Job			multiple times.
		printed.
Invalid Booklet #xx		The Booklet Finisher cannot perform	Remove the remaining paper.
Clear Paper Path		the operation.
Invalid Booklet #xx		The Booklet Finisher cannot perform	Cancel the job.
Cancel Job		the operation.
Invalid Combination #1		Incorrect stacker choice requested.
		(Cannot deliver to Upper Tray from	Cancel the job.
Cancel Job
		Inserter.)
Invalid Combination #2		Incorrect stacker choice requested:
		(Cannot deliver to Container Stacker	Cancel the job.
Cancel Job
		from Inserter.)
Invalid Folder #xx		The Booklet Finisher cannot perform	Remove the remaining paper and
Clear Paper Path		the operation.	cancel the job.
Invalid Folder #xx		The Booklet Finisher cannot perform	Cancel the job.
Cancel Job		the operation.

OG

L

Troubleshooting 5-9

0 1