Ricoh Caplio R6 manual Preparing the SD Memory Card Format Card, 124

Display the SETUP menu.

• For the operating procedure, see P.122.

5

Changing Camera Settings

Preparing the SD Memory Card (FORMAT [CARD])

If the error message [CARD ERROR] is displayed when an SD memory card is loaded into the camera or the card has been used with a computer or other device, you must format the card prior to use with this camera.

Formatting is the process of preparing a card so image data can be written on it.

Caution------------------------------------------------------------------------------------------

If you format a card that still has images stored on it, the images will be lost.

To format a card, follow the steps below.

1

2 Press the " button to select [FORMAT [CARD]] and press the $ button.

•A screen appears to confirm formatting.

3 Press the #$ buttons to select [YES] and then press the MENU/OK button.

•Formatting starts. When it is done, the display returns to the SETUP menu.

•If no SD memory card is loaded, a message will be displayed. After turning the power off, load an SD memory card and repeat the formatting process again.

4 Press the MENU/OK button.

Protecting your images from being deleted----------------------------------------

•Move the write-protection switch on the SD memory card to “LOCK” to prevent your still images from being accidentally erased or the card from being formatted. (GP.21)

•If you unlock the card (by returning the switch to its original position), it is once again possible to erase images and format the card.

124