Changing Image Confirmation Time (LCD CONFIRM.)
Immediately after you press the shutter release button, the still image taken is displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 0.5 second, but this can be changed.
Available Settings
OFF (Image not displayed for confirmation) 0.5SEC. *Default setting
1SEC.
2SEC.
3SEC.
To change the image confirmation time, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.122.
2 Press the " button to select [LCD CONFIRM.] and press the $ button.
3 Press the !" buttons to select the desired setting.
4 Press the MENU/OK button, or
#button and press the MENU/ OK button.
When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may remain on the monitor while the image is displayed.
5 |