Downloading Images Without Using the Caplio Software
You can download images from the camera to a computer without having to use software.
1 Change [USB CONNECTION] to [MASS STR] on the SETUP menu. (GP.142)
2 Make sure that the camera power is off.
3 Connect the accessory USB cable to a USB port of your computer.
4 Connect the USB cable to the USB terminal of your camera.
• Your camera turns on.
• Your computer automatically reads a file necessary for recognizing the camera as a drive.
•After this preparation, the camera is displayed as a drive at [My Computer] (Windows) or Desktop (Macintosh).
5 From the displayed drive, copy a file to the desired location.
• The figure at right shows the folder configuration in the drive.
•When the contents of the internal memory are displayed, the drive name is [RICOHDCI].
Downloading Images to Your Computer
6 |
Example of the display in Windows XP
•Mass storage mode is not available on this camera if you are using Windows 98SE. Set to [ORIGINAL]. (GP.142)
•Do not turn off the camera or disconnect the USB cable during image transfer.
•If a file with the same name already exists at the destination, it is overwritten. If you do not want the file to be overwritten, rename the file or transfer data to another folder.
