Ricoh DSc424, DSc432, LD124c, LD132c If you load a paper size that is not selected automatically, er carefully until it stops, J Slide the paper tray into the print

Changing the Paper Size

F Load paper into the tray with the print side up.

I Pinching both sides of the end guide (A), move the end guide toward the paper stack until it stops (B).

ZGJS230E

Important

❒Confirm that the top of the stack is not higher than the limit mark inside the tray.

G Pushing the green lever of the side guide (A), move the side guide toward the paper stack until it stops (B).

ZGGH240E

H Confirm that the paper is fixed in place, and then lock the side guides.

ZGJS479E

ZGJS250E

Important

❒Be sure to move the end guide; otherwise, the paper may mis- feed.

J Slide the paper tray into the print-
	6
er carefully until it stops.

If you load a paper size that is not selected automatically

If you load a paper size that is not selected automatically, you need to specify the paper size with the control panel.

Following paper sizes that are not selected automatically.

Trays 1 and 2 : A5 L, A6 L,

11"⋅17"L, 81/2"⋅14"L, 81/2"⋅11"K, 51/2"⋅81/2"KL, 71/4"⋅101/2"KL, 8"⋅13"L, 81/2"⋅13"L, 81/4"⋅13"L, 8KL, 16KKL

Trays 3 and 4 *1 : B5 JISL, A5L,

81 / 2 " ⋅ 14" L, 81 / 2 "⋅ 11" L,

51/2"⋅81/2"KL, 71/4"⋅101/2"L, 8"⋅13"L, 81/2"⋅13"L, 81/4"⋅13"L, 8KL, 16KKL

Tray 3 *2 : 81/2"⋅11"K

*1 Paper tray unit (option)

*2 LCT(option)

127