Ricoh DSc424, DSc432, LD124c, LD132c [OK], Code, Code, [OK], [OK], Note, Press, Press, [Change ], [SUB Code], [SEP Code], CPress [OK], FPress [OK], FPress [OK], BSelect [On], BPress [Sender]

Registering Addresses and Users for Facsimile/Scanner Functions

To use the Fax destination as the sender

You need to register the user code in advance. ⇒ p.72 “Registering a New User Code”

APress [Protection].BPress [Sender].

CPress [OK].

To select the lineAPress [Select Line].

5

B Select the line, and then press [OK].To program the SUB CodeA Press [Adv. Features], and then select [SUB Code].B Press [Change] under TX SUBCode.C Enter a SUB Code using the number keys, and then press [OK].D To enter a password, press [Change ] under Password (SID).E Enter a password using the number keys, and then press [OK].FPress [OK].To program the SEP CodeA Press [Adv. Features], and then select [SEP Code].B Press [Change] under RX SEP

Code.

C Enter a SEP Code using the number keys, and then press [OK].D To enter a password, press [Change] under Password (PWD).

E Enter a password using the number keys, and then press [OK].

FPress [OK].

To set the International TX ModeA Press [Change] under International TX Mode.B Select [Off] or [On], and then press [OK].To select the fax header

Note

❒You can register the fax header in Program Fax Information in the system settings for Facsimi- le Features. See “Program- ming”, Facsimile Reference <Basic Features>.

APress [Change] under Fax Head- er.BSelect [1st Name] or [2nd Name], and then press [OK].To set label insertion

When Label Insertion is set to ON, the receiver's name and standard messages are printed on the fax message when it is received at the other end.

A Press [Change] under Label In- sertion.BSelect [On].CPress [Change] under Line 2.

78