Ricoh DSc424, DSc432, LD124c, LD132c Timer Settings, ❖Auto Off Timer, ❖Panel Off Timer, ❖Energy Saver Timer, ❖System Auto Reset Timer

Settings You Can Change with User Tools

Timer Settings❖Auto Off Timer

After a specified time has elapsed following job completion, the machine au- tomatically turns off in order to conserve energy. This function is called “Au- to Off”.

The machine status after the Auto Off operation is referred to as “Sleep mode”. For the Auto Off Timer, specify the time to elapse before Auto Off.

Note

❒Default: 45 minute(s)

❒Enter a time interval from 1 to 240 minutes, using the number keys

❒ Auto Off may not work when error messages appear. 4

❖Energy Saver Timer

Set the amount of time the machine waits before switching to lower-power mode after copying has finished or the last operation is performed.

The time can be set from 1 to 240 minutes using the number keys

Note

❒Default: 15 minute(s)

❖Panel Off Timer

Set the amount of time the machine waits before switching the panel off after copying has finished or the last operation is performed.

Note

❒The warm up time for making a copy from standby mode is 3 seconds for Panel off Level 1 and 10 seconds for Panel off Level 2.

❒Default: 60 seconds

❒Enter a time interval from 10 to 999 seconds using the number keys

❖System Auto Reset Timer

The System Reset setting automatically switches the screen to that of the func- tion set in Function Priority, when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset interval. See p.53 “Function Priority”.

Note

❒Default: On, 60 seconds

❒The time can be set from 10 to 999 seconds, using the number keys

59