Ricoh DSc424, DSc432, LD124c, LD132c Registering a Fax Destination, key, [On], Note, Note, [OK], Press, Press the, ❖IP-FaxDestination, F Press [Fax Dest.], B Press [System Settings]

Fax Destination

❒You can program a standard message other than those registered in the machine. See “Programming, Chang- ing, and Deleting Standard Messages”, Facsimile Refer- ence <Advanced Features>.

•International TX mode

When setting the International TX mode to [On], the machine transmits more carefully by lowering transmission speed. However, communication times increase.

❖IP-Fax Destination

You can program the following items in an IP-Fax Destination:

Note

❒ This setting only works if the IP fax function has been selected.

•IP-Fax

Register the IP-Fax destination. You can register the name using up to 128 characters. You must make this setting when using IP-Fax.

•SUB Code

Registering a SUB Code allows you to use Confidential Trans- mission to send messages to the other fax machines which sup- port a similar function called “SUB Code”. See “SUB Code”, Facsimile Reference <Advanced Features>.

•SEP Code

Registering a SEP Code allows you to use Polling Reception to receive faxes from the other fax machines which support Poll- ing Reception. See “SEP Code”, Facsimile Reference <Advanced Features>.

•Select Protocol

Select the protocol for the IP- Fax transmission.

Registering a Fax Destination

A Press the {User Tools/Counter} key.

B Press [System Settings].

C Press [Administrator Tools], and thenpress [TNext].5 D Press [Address Book Management].

E Select the name whose fax destination you want to register.

Press the name key, or enter the registered number using the number keys.

Note

❒If you press, you can search by the registered name, user code, fax number, folder name or e-mail address.

❒To register the name, key dis- play, and title, see p.70 “Regis- tering a Name”.

F Press [Fax Dest.].

G Enter the fax number using the number keys, and then press [OK] under Facsimile No..

77