Linksys WAP54G
Follow these steps for obtaining the hexadecimal WEP key from the WAP54G:
1.Open a web browser and connect to the access point.
You connect to the access point by entering the access point’s IP address in the location bar of your web browser. If you do not know the IP address of the access point, please refer to the software or manual that came with the access point in order to determine the IP address. After successfully logging in, you will see a page similar to the following:
2.Write down the
3.Click Edit Security Settings to access the WEP setup page. When WEP Security is enabled, you can easily view the keys.
11
Section 13: Appendices | 71 | 13 |
|
|
|
