Roland MV-8000 Playing your songs

113
Playing your songsEditing a songCreating a song (Song Recording) Using effects Adjusting the balance of your song and
mastering it
Playing your songs
Loading the song you want to play
In order to play back a song, you must select that song as the “current song.” If the song
is saved in a different project, you'll have to switch projects before you can select the
song.
To select a song from the current project
➜ perform the procedure described in Selecting a song from the current
project (p. 88).
The selected song will become the current song, and the SEQUENCE screen will
appear.
To switch a song from another project
➜ perform the procedure described in Selecting a song from a different
project (p. 88).
The selected project will be loaded, and will become the current project. The song that
is selected at this time will be the song that was the current song when the project was
saved. To switch to the song you want to edit, perform the procedure described in
Selecting a song from the current project
(p. 88).
If you turn off the power or switch to a different project, any changes you made to the
contents of the current song will be lost. If you want to keep the current song, save
the project first (p. 138).
Playing a song
Here's how to play back a song.
1.
Load the song as described in Loading the song you want to play (p. 113).
2.
Press .
The current time will return to the beginning of the song.
3.
Press .
Playback will begin.
4.
Use the MASTER knob to adjust the volume.
5.
Press .
Playback will stop.
Even if you switch the
current song, the data is
preserved within the
MV-8000's internal
memory. However if you
switch projects, the
contents of internal
memory will be lost.
When you switch the current
project, a message of “Save
current project?” will appear.
If you press [F5 (Yes)], the
current project will be saved
b
efore loading the newly
selected project. If you press
[F1 (No)], the newly selected
project will be loaded without
saving the current project.
You can fast-forward, rewind,
or jump to a specific location of
the song whether the song is
playing or stopped. For more
about changing the time
location within a song, refer to
the Quick Start section
“Moving the time location and
operating the sequencer” (p.
12).
If you are monitoring through
headphones connected to the
PHONES jack, use the
PHONES knob to adjust the
volume.
ECS05_manual_e.book 113 ページ ２００５年１１月３０日 水曜日 午前１１時１４分