Roland MV-8000 LOOP popup

240
SEQUENCE
LOOP popup
Here you can set parameters for loop playback.
To access this screen
• ➜➜
(
choose Loop
)
➜
Explanation of each area
1. QUICK SET Length
Specify the length of the loop that will be set when
you press LOOP [QUICK SET].
Range: Marker, 1~ 2 ~32
If you choose Marker, the region between markers
will be the loop region. However if not even one
marker has been set, looping will not turn on.
2. Loop Top
Specifies the starting time of the loop.
Range: 0001-01-000~(Loop End)
3. Loop End
Specifies the end time of the loop (i.e., where it will
return to the beginning).
Range: (Loop Top)~9999-**-***
• ** will depend on the time signature you set.
• Even if you set the Loop Start/End times, the
QUICK SET loop time will be used if you turn
looping on in QUICK SET. (The Loop Start/End
times will be lost.)
• Changing the QUICK SET Length does not adjust
the Loop End time location.
• You cannot set Loop Start to a location after Loop
End.
F-buttons
Now ➔ Top
Assigns the current time as the value of the Loop Top
parameter.
Now ➔ End
Assigns the current time as the value of the Loop End
parameter.
ECS05_manual_e.book 240 ページ ２００５年１１月３０日 水曜日 午前１１時１４分