380
MIXER

MIXER (AUX / FX / AUDIO PHRASE / INPUT) screen

This is the mixer screen for the AUX buses, effects,
audio phrase parts, and inputs.

To access this screen

(AUX bus / Audio phrase / Input)

Explanation of each area

1.

Mixer

This is the name of each mixer.

To switch between In (A), In (C), In (O), and In (R),
use the System Parameter / Global screen

Input
Select

(p. 320) setting.

2.

MFX (Multi-effect)

A bus in which MFX is inserted is displayed as
“MFX.”

“---” indicates that MFX is not inserted.

3.

DlyCho Send (Delay/Chorus Send Level)

Specifies the amount of signal sent from AUX buses
1~4, audio phrases, and the input bus to the
delay/chorus effect.
Range:
0
~127
4.
Reverb Send (Reverb Send Level)
Specifies the amount of signal sent to the reverb
effect.
Range:
0
~127
5.
Pan
Specifies the stereo position at which the signal is
output to the bus.
For A.Phrs this specifies the panning for output to a
bus; for In this specifies the panning for input to the
input mixer.
Range: L63~
0
~R63
6.
Level
Specifies the volume of each part.
Range: 0~
100
~127

You can use the eight sliders on the top panel to
adjust the Level parameter.

7.

Level meter

Displays the post-fader level of each part.

The top indicator of the meter will light when the
signal clips (= 0 dB). If this occurs, lower the value
of the Level parameter.

8.

Output

Specifies the signal output destination for each part.

Display Explanation

AUX1~AUX4 AUX bus mixer
DlyCho Delay/Chorus bus mixer
Reverb Reverb bus mixer
A.Phrs Audio Phrase mixer
In (A) Analog input mixer
In (C) Digital (coaxial) input mixer
In (O) Digital (optical) input mixer
In (R) Digital (R-BUS) input mixer

Value Explanation
Off

No output.
Mix
Output the sound to the Mix bus. The
sound will be output from Master and
Phones.
AUX1~
AUX4 Output the sound to an AUX bus.
MLT1~
MLT8
Output the sound to an ANALOG
MULTI OUTPUT bus (mono output).