Roland MV-8000 Disk management

149
Project and disk management
Project and disk managementCreating an audio CD Using the MV8-OP1 (Audio I/O
Expansion) to connect external devices
Using data of other formats Using the MV-8000 with MIDI or V-LINK
devices
Disk management
This section describes various settings and operations you can perform for the
MV-8000's drives.
To access the Disk Utility screen
1.
Press .
The DISK/USB MENU screen (p. 329) will appear.
2.
Press (Disk Utility), or use the cursor to
select the DISK UTILITY icon and press
. The DISK UTILITY screen (p. 334)
will appear.
Formatting a disk
This operation formats a disk, erasing all data that was on that disk. By formatting
(erasing) a floppy disk or a CD-RW disc that had been used by a device other than the
MV-8000, you can make it usable on the MV-8000.
1.
Access the Disk Utility screen as described in To access the Disk Utility
screen (p. 149).
2.
Move the cursor to the drive whose disk you want to format.
3.
Press (Format).
The display will ask “All data on the disk will be lost. Are you sure?”
Naming a disk
You can assign a name (volume label) to each disk.
1. Access the Disk Utility screen as described in To access the Disk Utility
screen (p. 149).
2.
Move the cursor to the drive to which you want to assign a volume label.
If you want to assign a volume label to a floppy disk, insert the floppy disk into the
floppy disk drive.
3.
Press (Volume Label).
The EDIT VOLUME LABEL (p. 199) will appear.
4.
When you have finished inputting the name, press (OK).
F-button Action
(No) Cancels the operation.
(Yes) Begins formatting the selected disk.
There is no way to recover
data that has been deleted.
(Unless, of course, you
have previously made a
b
ackup of that data.)
Roland Corporation can
accept no responsibility for
any loss of data or any
damages you incur as a
result of such loss.
If you format the hard disk, a
default project and song will
b
e automatically created after
formatting, and the
SEQUENCE screen (p. 205)
will appear.
For details on inputting
characters, refer to Quick
Start; “Inputting text” (p.
9).
ECS05_manual_e.book 149 ページ ２００５年１１月３０日 水曜日 午前１１時１４分