Roland MV-8000 21 Vocal Multi

430
Effect Block
21 Vocal Multi
LimDes (Limiter/De-Esser)
You can use either the Limiter or De-esser functions
of this effect. The limiter is an effect that compresses
high-level signals, thereby preventing distortion.
De-esser is an effect that cuts the sibilance in vocals,
giving sounds a softer quality.
1. Mode
Value: LMT, DES
This determines whether the Limiter or De-esser
function is used.
2. Limiter Threshold
Value: -60–0 dB
This adjusts the level of the signal at which the
Limiter begins to function (the threshold level).
3. Limiter Level
Value: -60–12 dB
This sets the level of the signal passing through the
Limiter.
4. Limiter Release
Value: 0–100
This adjusts the time for the Limiter to stop
functioning after the signal falls back under the
threshold level.
5. De-esser Sens
Value: 0–100
This adjusts the sensitivity of the de-esser effect based
on the input level.
6. De-esser Frequency
Value: 1.0–10.0 kHz
This adjusts the frequency to which the De-esser
effect is applied. The effect works best at higher
frequencies than that of the settings.
Pitch (Pitch shifter)
This effect changes the pitch of the source sound.
1. Pitch
Value: -12–+12
This adjusts the pitch in semitone (half-step)
increments.
2. Fine
Value: -100–+100
This finely adjusts the pitch shift.
3. Effect Level
Value: 0–100
This sets the volume of the pitch-shifted sound.
4. Direct Level
Value: 0–100
This sets the volume of the direct sound.
ECS05_manual_e.book 430 ページ ２００５年１１月３０日 水曜日 午前１１時１４分