Roland MV-8000 EFFECTS EDIT screen

375
EFFECTS
IMPORT EFFECTS MIXER
EFFECTS EDIT screen
Here you can make detailed edits to the multi-effect,
delay/chorus effect, or reverb effect.
To access this screen
• ➜ (select the current effect block) ➜
Explanation of each area
1. Effect section
Indicates the name of the effect section you are
editing.
2. Effect patch name
Indicates the name of the currently-recalled effect
settings.
3. Effect algorithm name
Indicates the name of the currently-used effect
algorithm.
For more about the effect patch name and effect
algorithm name, refer to the Appendices (p. 383).
4. Algorithm icon
The displayed icon indicates the currently-used effect
algorithm.
5. Effect switch
Indicates the status of the current effect
6. Control knobs
Use these knobs to control major parameters of the
current effect.
There are several knobs for each effect block, and
indications of C1~C3 are displayed for some of
these. These knobs correspond to the C1~C3 knobs
of the top panel.
The Knob Assign function (p. 377) lets you freely
assign an effect parameter to each knob.
7. Effect blocks
These are the individual effects that make up each
effect algorithm. To make settings in a particular
effect block, use [F1 (Block ▲ )] or [F2 (Block ▼ )] to
select that block.
The tab area of the effect block shows the individual
effects that make up the effect patch. For details,
refer to Effect Block (p. 399).
8. Switch parameter
This indicates the status of each effect block
(individual effect).
9. Effect block parameters
This area displays the parameters of each effect block.
For details on the displayed parameters, refer to
Effect Block (p. 399).
Display Explanation
MFX EDIT Multi-effect Edit screen
DELAY/CHORUS
EDIT
Delay/Chorus Edit
screen
REVERB EDIT Reverb Edit screen
Status Explanation
Off The effect is bypassed (not used).
On The effect is enabled.
Value Explanation
Off The effect block is not used.
On The effect block is enabled.
ECS05_manual_e.book 375 ページ ２００５年１１月３０日 水曜日 午前１１時１４分