52
Editing a sampled sound

Managing patches

Here's how to save or recall a patch.

Registration a patch in the library of the Project

When you've sampled or imported data to create a patch for the current part, here's
how you can register the patch in the library. Since the patch library is maintained for
the entire project, you can use the patch in other songs as well (a patch registered in
this way cannot be used by a different project).
1.

Press .

The

INSTRUMENTS screen

(p. 265) will appear.

2.

Use (up/down) to select the part that
uses the patch you want to register.

The selected part number (the current part) is
highlighted.

3.

Press (Library).

The

PATCH LIBRARY screen

(p. 268) will appear.

4.

Select the patch library number in which you want to register the patch, and
press (Write Here). The current patch will be saved in the library number
you specified.

Saving a patch to disk

Here's how to save the current patch to disk. A patch saved in this way can be used by
a different project.
1.

Press .

The

INSTRUMENTS screen

(p. 265) will appear.

2.

Use (up/down) to select the part that uses the patch you want to save.

The selected part number (the current part) is highlighted.

3.

Press .

The menu will appear.

4.

Select Save Patch and press .
INSTRU-
MENTS
When you register the patch,
you can assign a category to it
if you want. This will make it
easier for you to find the patch
later.
INSTRU-
MENTS
ECS05_manual_e.book 52 ページ ２００５年１１月３０日　水曜日　午前１１時１４分